HOW TO CHANGE THERMAL COPIER BELT
National Tattoo Copy Belt Changing Demonstration Video
Video Transcript:
Works for all Standard and 3M Model copiers.
Open your cover, release your two spring latches. Then release your locking roller, slide your
roller back off the frame. You will see
how it engages. Unlock your support
stand. Always work your belt out to the left.
Take your new belt, place it over the bottom roller, around
the two top rollers, over your tracking roller in back, which is the largest
roller. Sometimes you need to help it
over the transformer. Get it in there to
lay flat, lock your front roller back down on the frame. Realign your support lock, your latches down,
close your lid. Reengage your safety
interlock latches down. Close your lid. Reengage your safety interlock switch and
your machine is now ready to run with a brand new belt.
hey anyone, I was just checkin out this blog and I really enjoy the basis of the article, and have nothing to do, so if anyone would like to to have an compelling conversation about it.
ReplyDelete경마사이트
토토